How to sublimate Ceramic Mug

First, print the selected artwork on Sublimation Paper using Sublimation Printer.
Attach Ceramic Mug onto the printed Sublimation Paper using Heat Resistant Tape.
Set the Drinkware Press machine.
Press “MODE” and switch to “SET” then set 175`C.
Next, press “MODE” and switch to “SET+ TEMP” then set 175`C.
Next, press “MODE” and switch to “SET+TIME”, then set 25 seconds. Press “MODE” again to complete the settings.
Place the Ceramic Mug inside the machine and press the “Square” button to start sublimate.
The machine starts sublimate once the set temperature has been achieved.
Remove the Ceramic Mug from the machine by holding the mug’s handle.
Remove the Sublimation Paper and allow it to cool down. Caution, the mug is very hot!
You’re done!